Outer parts of the asymmetric blouse with ± 7 or 8 cm from the midline to face, long blouse ± 25 cm from 10 cm line from the waist or hip line. Wearing collar and sleeve header board Poff with ¾ length sleeves.
At the end of the arm there is a bus that ends tied. Having a waist coup and coup side.
Specification Pattern Blouse Asymmetry:
Connect the basic pattern skirt with a basic body pattern. Add 2 cm in the center of the face to parts of the tongue. For asymmetric parts or overslah, formed from the neckline towards the middle face. This overslah large models adjusted for more or less 7 or 8 cm. The line forms to the boundaries of the waist as shown in the picture. To advance in the middle layer made 4-5 cm. On the upper side of the blouse or the armpits, down 1 cm and 1 cm removed.
Issued on 1 cm waist, hips and bottom 1 cm clothing 1 ½ - 2 cm, then formed. Pattern is similar to the back of the pattern. On the same side of the pattern stretched forward.
howto make pattern Blouse
Description sleeves and collar blouse pattern asymmetry:
Scissor arm pattern on the center line of the arm and stretch 5 cm and 3 cm increase. Then form at the top of the arm. The higher the peak arm raised at the crease at the top of the arm will be higher as well, and the width of the pattern widened more and more wrinkles on peak arm.
kind clothes pregnant model
For the manufacture of the collar pattern can be seen in Figure collar length = ½ neck circumference in body pattern. howto make pattern Blouse with Asymmetrical
